- NEWS
- News Center
What is the process and use of tire separators?
Release time：2022-08-26 Browse：382 In the production process of tires, it is a tire separator for rubber tires. The apex plastic bead pad is disc-shaped, and the arc of the disc is matched with the rubber tire. The side wall of the inner cavity is provided with several circles of protruding parts, the bottom of the shaped baffle is provided with a stepped part, a larger through hole is arranged in the middle of the baffle, and there is also a protrusion. The shaped partition is plastic. The bead spacer has the advantages of no rubber bonding after tire molding, good tire molding quality, good heat dissipation and no deformation during the molding process.
The tire separator is mainly used for the isolation process of placing steel wire apex in the tire production process. The product is heat-resistant and anti-sticking, so that the steel wire apex is shaped and stacked.
Process use: Tire separator first is a type of rubber tire shaped separator, which is mainly used for the isolation process of placing steel apex in the tire production process. Stacked, the bead pad is disc-shaped, and the arc of the disc is matched with the rubber tire.
The function of the tire separator is to prevent the two workpieces from directly contacting the workpiece with excessive pressure and damage the workpiece, and to increase the force area. In addition to the above functions, the gasket also has a certain sealing effect depending on the material.
What we have introduced above is the relevant knowledge of bead pads. I hope the above introduction can bring you some hints and help.
The tire separator is mainly used for the isolation process of placing steel wire apex in the tire production process. The product is heat-resistant and anti-sticking, so that the steel wire apex is shaped and stacked.
Process use: Tire separator first is a type of rubber tire shaped separator, which is mainly used for the isolation process of placing steel apex in the tire production process. Stacked, the bead pad is disc-shaped, and the arc of the disc is matched with the rubber tire.
The function of the tire separator is to prevent the two workpieces from directly contacting the workpiece with excessive pressure and damage the workpiece, and to increase the force area. In addition to the above functions, the gasket also has a certain sealing effect depending on the material.
What we have introduced above is the relevant knowledge of bead pads. I hope the above introduction can bring you some hints and help.
Copyright ? 2019 Copyright: Changshu Yongquansheng Hardware Products Co., Ltd. ?Su ICP:19051896 ?Technical Support：Dezan Network